2002 Chevy 3500 HD

Within the custom truck scene, the degree of modifications done to a truck separates the men from the boys. Roll into a show with a 4/6 drop and 18-inch rims and rubber and you're going to be clowned. Cruise onto the showfield with airbag suspension and 20s, and you will be accepted. Drive into a show with the ability to lay your truck's body on the ground while tucking big wheels and you are considered by most of the custom truck enthusiast public to be a hero. These days, it's all about taking things to the extreme when building an award-winning show truck, and with so many ideas executed over and over again, it takes something pretty unique with a deep focus on craftsmanship and detail to spin the collective domes of the Truckin' staff. We have indeed seen it all.

Today, the term body drop is a part of the majority of truck enthusiasts' language and is the mother of all custom alterations one can perform on their ride. It is a no-turning-back modification that forever changes a truck's body structure. Juan Barron of Denver, Colorado, is an enthusiast who went the extra mile when constructing the stunning '02 1-ton Chevy 3500 HD dualie laid gracefully across these pages. From the onset of the project, both Juan and Mitch Diamond of First Strike Design in Pueblo West, Colorado, knew this Crew Cab was destined for greatness.

The first step in any successful truck buildup is creating a stance that will drop jaws. A truck's stance, whether it is hugging the earth or scraping the clouds, gives it an attitude and edge that sets the stage for the rest of the modifications. To give the dualie that long and low look, Juan took it to Roberts Tires & Wheels in Denver, for a complete air suspension system. Providing lift up front are Firestone 226C airbags mated to custom-fabricated spring cups tooled up by Mitch Diamond at First Strike Design. Out back, Roberts Tires & Wheels installed an Air Ride Technologies Air Bar four-link and C-sectioned the frame to ensure a maximum slam when the Firestone air bellows were deflated. Feeding air to the 'bags are Air Ride Technologies' 1/2-inch Big Red valves and 1/2-inch air line. A digital Air Ride Technologies air pressure gauge panel resides inside the cab in the overhead console. Before Juan commissioned Mitch Diamond, at First Strike, to perform the body drop, a set of 19-inch custom Lightning wheels from Brentz Wheels in Coppell, Texas, were obtained to fill the wheelwells and shoehorn onto load-rated Toyo Proxes rubber, measuring P255/50R19. Mitch Diamond at First Strike Design sat down with a sketchpad and came up with the one-off design of these wheels that feature open slots and a lot of character.

Suspension was adjustable and the frame successfully put its John Hancock on the Colorado soil, Juan desired the truck's rockers to do the same and delivered the truck to First Strike Design, where Mitch Diamond laid the beast out. The bed and cab floors were raised to allow the framerails to ascend upward and the cab and bed to drop to the ground. After the cab and bed were hammered on the tarmac, the front crossmember was nipped and tucked to bring the '03 Cadillac Escalade front clip level with the shop floor. To make cruising the extra heavy Chevy more pleasurable, Juan had Mitch spend a little time under the hood.

With a stout 8.1L 496ci big-block Chevy sandwiched between the framerails, this heavy hauler did not need much in the way of performance upgrades. Juan decided a throaty-sounding aftermarket exhaust system would go along nicely with his switch-hitting and low-rolling cruising sessions, so he chose a MagnaFlow system to enhance the voicebox of his burly big-block. The system was custom-built at First Strike Design. After the powerplant was given some mild performance spice, Mitch sparked up his welder and began altering the stock-metal landscape to create a smooth exterior to accept the unique paint and graphics treatment.

View of this bad Bow Tie was brought up to custom par using an '03 Cadillac Escalade front clip and a Trenz Manufacturing polished vertical billet grille insert. The bumper was sectioned to allow for additional ground clearance when Juan gets in the mood to tap the switches and drag the rockers. Instead of just bolting the bumper up (as most people do), Mitch opted to get a little crazy and move it in tight - close to the grille and fenders to give the nose of the truck a smoother appearance.

Moving rearward, a one-off custom cowl-induction hood was built at First Strike Design to provide ample breathing room for the 8.1L big-block engine when the truck is laid out and in full how mode. A look at the tail end of Juan's rocker-wrinkling ride reveals the addition of a Sir Michael's steel roll pan and the subtraction of the factory tailgate handle, using a Sir Michaels tailgate handle relocator kit. To get truck show spectators to do a double take at the truck's rearview, Mitch grafted a Cadillac Escalade license plate box into the roll pan for a one-off look. A SnugTop tonneau was placed over the bed to seal out the elements. After Mitch finished welding, grinding, sanding, and smoothing the truck's envelope, it was time to seal it up with a bright and bold custom paint scheme that would help land the truck on the coveted Truckin' cover. A trip to the paint cabinet yielded House of Kolor Candy Apple Red, Tangelo, Yellow, and Vanilla hues to bring the exterior to life. From the top body line up, Mitch used House of Kolor Candy Apple Red mixed with Red Ice Pearl to give the top of the cab, bed, and hood some definition. Moving down from the bold Candy Apple Red, Mitch applied the House of Kolor Tangelo and faded it into a bright-yellow. The artistic fade was continued using House of Kolor Vanilla just below the yellow, which completes the custom graphics picture in style. Up top, a few Candy Apple Red accent graphic lines were applied and dropped down into the Tangelo to break everything up. Once the trick custom paint scheme was complete, the Candy Apple Red and Tangelo hues were separated with a blue pinstripe to give the graphics some dimension. After the clear was applied, a few hours were spent color-sanding and buffing the contrasting hues to a brilliant shine before the truck was treated to some interior re-styling.

A peek inside this cutting-edge Crew Cab reveals dash and door panel trim pieces coated in Candy Apple Red for a strong contrasting effect. The factory seating surfaces were updated with Katzkin Exotics covers and incorporate dark-graphite leather with billet inserts. A clean and classy cabin is the result of this upholstery blend, which matches the rich looks of the exterior perfectly. Juan Barron has created one amazing dualie using the professional fabrication, paint, and bodywork skills of Mitch.

The truck was completed just before the 2003 SEMA Show in Las Vegas, where it was featured in the Meguiar's display. Special thanks goes out to Brent Walker of Brentz Wheels, Mitch Diamond of First Strike Design, Flex-a-lite, House of Kolor, Katzkin, Meguiar's, Roberts Tires & Wheels, SnugTop, Toyo Tires, and Trenz Manufacturing. Also helping extensively with the project were Dave Watkins and Duane Kuiken, who burned the midnight oil during the last few days of construction for Juan's ride to be able to make it to SEMA. An extra special thanks goes out to Mitch's wife, Annie Diamond, for keeping everyone fed and motivated during the truck's 8-month transformation from stocker to shocker, and to Juan's wife, Adrienne Barron, for being so supportive of his passion. This rocker-crushing custom is sure to turn heads and drop jaws for many show seasons to come.

A Kenwood 911 DVD head unit keeps the entertainment level at a premium when cruising in this Crew Cab creation.	Comfort and style are rolled into this slick interior package featuring Katzkin threads with dark-graphite and billet-colored hues. These trick covers are from Katzkin's Exotics line of aftermarket upholstery.